- Deep groove ball bearings
- Cylindrical roller bearings
- Aligning ball bearings
- Stainless steel bearings
- LNSERTED bearings
- Ball introduced
- Plain Bearings
- Needle Roller Bearings
- Angular contact ball bearings
- Thrust Roller Bearings
- Spherical roller bearings
- Thrust Ball Bearings
- Rolling mill bearings
- Tapered Roller Bearings
- Plastic bearings
- Linear motion bearings
| IKO plastic bearings in use problem determination | |||
| 点击数：3765 日期：2014/4/4 | |||
| 1, observation: bearing lubrication and no debris and moisture to enter, that IKO bearing oil seal not wear, if you open the original bearing box, visually check the plastic bearing and periodically check the oil seal. Check near the bearing oil seal condition to ensure they are sufficient to prevent the hot liquid, corrosive liquid and gas infiltration along the axis of the bearing oil seal, if damage should be replaced as soon as possible. Check the automatic lubricating system ensures that the oil or grease into the bearing, and ensure that the correct amount of added and check the lubricant is discolored or black, if there is such a situation typically lubricants contain impurities, use this on IKO bearing is harmful. 2, listen: use hearing to identify irregular operation of a very commonly used method. As with a screwdriver or electronic stethoscope to detect a streamlined abnormal noise is often used to have some experience of the operator and repair personnel. IKO bearings if it is good running condition will be issued a low hum sound, such as plastic bearing issue is a sharp hissing sound, squeaking sound when you and other irregular, it may be that the bearing has been in bad condition. 3, touch: high temperature often IKO bearings has been in abnormal conditions, high temperature of bearing lubricant is harmful, but caused by the combined bearing lubricant temperature bearing some time when, if the bearing at the temperature higher than 120 DEG C in long-term operation will reduce bearing life. The cause of plastic bearing high-temperature lubricants insufficient or excessive lubricant, lubricant contains impurities, heavy load, IKO bearing damage, inadequate clearance and oil seal friction. Under normal circumstances, bearing lubrication lubrication in or after there will be natural temperature rise and will last for a day or two. |
|||
| On a message：2014 China International Bearing Industry Exhibition Invitation work has already started Next information：NACHI bearings should not be too much grease | |||